Welcome Guest Search | Active Topics | Log In | Register

Rossi Yamaha YZR-M1 Official Build Diary - Pack 18 (UK) Options
Spal
#1 Posted : 08 June 2020 22:20:27

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,589
Points: 13,620
Location: West Yorkshire
Pack 18 contains parts for stages 67-69

Stage 67

Contents: Left handle, Clutch lever, Button bracket, Buttons, Lever assembly, Connector, Ring, Ring nut support, Collar

Take the adjustment ring and fit it into the end of the ring nut support. Now place the support over the left handle, into the notch, and fit the collar onto the underside. Fit the left handle button bracket and buttons around the handle as shown. Fit the lever assembly into the two holes in the handle and fit the connector into the indicated hole in the handle. Now insert the post of the clutch lever into the front hole in the handle.

Stage complete, carefully store any remaining parts in a stage labelled bag.
Spal attached the following image(s):
IMGL3958.JPG
IMGL3959.JPG
IMGL3960.JPG
IMGL3962.JPG
IMGL3963.JPG
IMGL3965.JPG
IMGL3966.JPG
IMGL3967.JPG
IMGL3968.JPG
IMGL3969.JPG
Spal
#2 Posted : 08 June 2020 22:23:06

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,589
Points: 13,620
Location: West Yorkshire
Stage 68

Contents: Right handle, Brake lever, Button support, Connector, Button, Tube cables x 2

Take the right handle, button support and buttons and fit them around the right handle. Insert the connector into the indicated hole in the right handle. Take the brake lever and insert it into the front hole in the right handle, then separate the two tube cables from the sprue. Fit the two cables into the holes as shown.

Stage complete, carefully store any remaining parts in a stage labelled bag.
Spal attached the following image(s):
IMGL3971.JPG
IMGL3972.JPG
IMGL3973.JPG
IMGL3974.JPG
IMGL3975.JPG
IMGL3976.JPG
Spal
#3 Posted : 08 June 2020 22:26:11

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Official Builds, Registered

Joined: 19/06/2013
Posts: 4,589
Points: 13,620
Location: West Yorkshire
Stage 69

Contents: Right grip, Left grip, Left end cap, Bracket, Type C screws

Retrieve the left handle from Stage 67, the left grip and left end cap, fit the grip over the handle and then insert the end cap into the grip. Slide the right grip onto the right handle. Secure the bracket to the right handle with the type C screw and mount the two handles to the top of the forks.

Stage complete, carefully store any remaining parts in a stage labelled bag.

Spal attached the following image(s):
IMGL3978.JPG
IMGL3979.JPG
IMGL3980.JPG
IMGL3982.JPG
IMGL3983.JPG
IMGL3985.JPG
IMGL3986.JPG
IMGL3987.JPG
IMGL3988.JPG
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.115 seconds.
DeAgostini