Welcome Guest Search | Active Topics | Log In | Register

R2 won't activate Options
jgmayer
#1 Posted : 19 August 2019 02:06:57

Rank: Newbie

Groups: Registered

Joined: 31/03/2018
Posts: 3
Points: 9
Location: Marshfield, WI
Hi,

I can't get R2 to activate. I've tried the few seconds with the switch off, pulled the adapter and turned it on. I've also tried leaving it on with the adapter in, checked the connections, and tried two sets of batteries(first were ultrafire, second were samsung). All the tests during assembly that I tried worked fine. Any ideas of what else to try?

Thanks,

John
tschwand
#2 Posted : 19 August 2019 02:16:55

Rank: Semi-Pro Level 1

Groups: Registered

Joined: 04/08/2017
Posts: 59
Points: 201
Location: Missouri, USA
Had trouble with mine initially as well. Took out the battery box, checked all the batteries and reinserted them, making sure there was good positive side contact. It worked. I think some batteries may not have a large enough positive tip welded on. Really wish they had used a more standardized battery.
jgmayer
#3 Posted : 19 August 2019 02:21:37

Rank: Newbie

Groups: Registered

Joined: 31/03/2018
Posts: 3
Points: 9
Location: Marshfield, WI
I can check that again, although they all appeared to make solid contact. The springs moving toward the side seemed to be a bigger problem.
jgmayer
#4 Posted : 22 September 2019 01:26:50

Rank: Newbie

Groups: Registered

Joined: 31/03/2018
Posts: 3
Points: 9
Location: Marshfield, WI
Still can't get this thing to activate. Does anyone have any other suggestions. I'm considering just trying to take it all apart and rebuild it, but I really don't want to have to go there.
Markwarren
#5 Posted : 22 September 2019 09:10:05

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Administrators, Global Forum Support, Registered, Moderator, Official Builds

Joined: 04/01/2016
Posts: 4,290
Points: 13,157
Location: Northamptonshire, England
Hi John

If you have, or can borrow a multimeter, check there is power coming out of the battery box. If you’ve taken the batteries out, it may want the startup procedure doing again. Check all the cables are inserted correctly and the right way round.

Here is the link for the troubleshooting information.

https://forum.model-space.co.uk/...aspx?g=posts&t=30247

Mark
Deekity
#6 Posted : 09 October 2019 17:05:21

Rank: Beginner Level 2

Groups: Registered

Joined: 17/07/2018
Posts: 11
Points: 33
Location: USA
Markwarren wrote:
Hi John

If you have, or can borrow a multimeter, check there is power coming out of the battery box. If you’ve taken the batteries out, it may want the startup procedure doing again. Check all the cables are inserted correctly and the right way round.

Here is the link for the troubleshooting information.

https://forum.model-space.co.uk/...aspx?g=posts&t=30247

Mark



Same problem - even have a different battery box. The leads coming out of the battery box never show voltage UNLESS R2D2 is plugged in (ON switch position doesn't matter). When unplugged the leads coming out of the box show no voltatge. R2 also does nothing whenthe box is connected to the unit AND R2D2 is plugged in. No lights no battery charge indicator, nothing. Any ideas?


EDIT - only because I am out of options - I think the 12V coming out of the box is bypassing the batteries altogether and it just showing the flow through from the mains. It will show 12V even with no batteries in the box and plugged in. Neither of my battery boxes will output 12V if I just measure at the connector.

Edit 2 NEVERMIND!! - I found the problem. I had 1 connector backwards - and even more IDIOTIC (keep in mind It's been 6 months since I tried this the last time) I forgot that to turn R2 on you had to not only turn the switch on, but press the on button on the front lol. (Also verified my first battery box was still bad).
Markwarren
#7 Posted : 09 October 2019 19:57:25

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Administrators, Global Forum Support, Registered, Moderator, Official Builds

Joined: 04/01/2016
Posts: 4,290
Points: 13,157
Location: Northamptonshire, England
Deekity wrote:
Edit 2 NEVERMIND!! - I found the problem. I had 1 connector backwards - and even more IDIOTIC (keep in mind It's been 6 months since I tried this the last time) I forgot that to turn R2 on you had to not only turn the switch on, but press the on button on the front lol. (Also verified my first battery box was still bad).


Nothing is ever idiotic, you get so involved trying to fix something that you completely forget the basics.

When fixing an issue on mine, I was convinced it was a different button, took 10 minutes to work that one out.

Glad you’ve all sorted.

Mark
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.233 seconds.
DeAgostini