Welcome Guest Search | Active Topics | Log In | Register

Official Standart Build Diary - Pack 4 Options
arpurchase
#1 Posted : 04 August 2019 18:19:16

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Registered, Moderator, Official Builds, Global Forum Support, Administrators

Joined: 27/09/2011
Posts: 14,794
Points: 44,911
Location: Dudley
Imperial Yacht Standart, Pack 4, Stages 26-35.

Stage 26

Stage 26 contents:- Boiler fret and etch skylights.

Remove the parts from the boiler fret and sand them smooth. Assemble the parts and when dry sand the assembly smooth. Test fit the boiler room on the deck.

From stage 19 take the life boat and smooth it with sandpaper. Paint it in the same way you have painted the other lifeboats and then add the thwarts to the inside.

Stage complete.

Store any unused parts in a labelled bag for future use .
arpurchase attached the following image(s):
P8033900.JPG
P8033902.JPG
P8033904.JPG
P8033905.JPG
P8033908.JPG
P8043916.JPG
P8043920.JPG
Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .

arpurchase
#2 Posted : 11 August 2019 12:55:10

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Registered, Moderator, Official Builds, Global Forum Support, Administrators

Joined: 27/09/2011
Posts: 14,794
Points: 44,911
Location: Dudley
Stage 27

Stage 27 contents:- Bulwark and plastic sheet.

Smooth the surface of the Bulwark then paint the side that is marked 'A1' matt white. Take the plastic sheet and cut a 20mm x 210mm strip off it. Use this strip to glaze the portholes cutting it to the sizes shown in the instructions and then glueing them in place.

When the glue is dry fix the bulwark to the bow of the ship in the same way you fixed the bulwark on the other side of the ship.

Next take the boiler room assembly from Stage 26 and using a file chamfer the inner edge to 45 degrees. Take a piece of 1x3mm strip and cut 8 lengths and glue them to the corners of the boiler room. When the strips have dried sand them to the boiler room edges.

Stage complete.

Store any unused parts in a labelled bag for future use .
arpurchase attached the following image(s):
P8053932.JPG
P8063937.JPG
P8063940.JPG
P8063947.JPG
P8073964.JPG
P8073966.JPG
P8113978.JPG
P8113976.JPG
P8113980.JPG
P8113983.JPG
P8113984.JPG
Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .

arpurchase
#3 Posted : 17 August 2019 15:50:08

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Registered, Moderator, Official Builds, Global Forum Support, Administrators

Joined: 27/09/2011
Posts: 14,794
Points: 44,911
Location: Dudley
Stage 28

Stage 28 contents:-
Bulwark, cannon, cannon mount and davit.

Smooth the surface of the Bulwark then paint the side that is marked 'A2' matt white. Take the plastic sheet and cut a 20mm x 210mm strip off it. Use this strip to glaze the portholes cutting it to the sizes shown in the instructions and then glueing them in place.

Take the bulwark and glue it next to the one previously fitted by inserting the tab at the bow end then glue and nail it in place making sure the bulwark is positioned exactly 7mm above the deck.

Take the metal parts and smooth any burs with a file, undercoat the parts then paint the davit white. Paint the gun with gunmetal and its stand black. When the paint is dry glue the gun onto its stand.

Stage complete.

Store any unused parts in a labelled bag for future use .
arpurchase attached the following image(s):
P8113987.JPG
P8163998.JPG
P8164001.JPG
P8174006.JPG
P8174008.JPG
P8174011.JPG
P8174016.JPG
P8174021.JPG
P8174020.JPG
Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .

Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.106 seconds.
DeAgostini