Welcome Guest Search | Active Topics | Log In | Register

4 Pages «<234
Graham's Easy Rider Build Options
bugsec
#61 Posted : 16 March 2019 18:19:07

Rank: Pro
Build-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/06/2010
Posts: 331
Points: 997
Location: Bannockburn
Build Stage 23 - The engine assembly
Parts required:
A from Parts 24, B from Parts 25.

Also required:
Transmission case from Stage 22.

The transmission case and crankcase are fitted together and secured with screws.

bugsec attached the following image(s):
062.jpg
bugsec
#62 Posted : 16 March 2019 18:20:07

Rank: Pro
Build-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/06/2010
Posts: 331
Points: 997
Location: Bannockburn
Build Stage 24 - The oil filter
Parts required:
B and C from Parts 26.

Also required:

The oil filter and oil filter top are fitted together.

bugsec attached the following image(s):
063.jpg
bugsec
#63 Posted : 16 March 2019 18:21:08

Rank: Pro
Build-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/06/2010
Posts: 331
Points: 997
Location: Bannockburn
Build Stage 25 - Fitting the oil filter
Parts required:
A from Parts 26.

Also required:
Engine assembly from Stage 23 and oil filter from Stage 24.

The oil filter is attached to the engine assembly and secured with screws.

bugsec attached the following image(s):
064.jpg
bugsec
#64 Posted : 16 March 2019 18:21:36

Rank: Pro
Build-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/06/2010
Posts: 331
Points: 997
Location: Bannockburn
Build Stage 26 - The distributor
Parts required:
Parts C, D and E from Parts 27.

Also required:
Engine assembly from Stage 25.

The gasket is fitted to the engine assembly. The distributor and distributor base are fitted together. The distributor is attached to the gasket.

bugsec attached the following image(s):
065.jpg
066.jpg
067.jpg
bugsec
#65 Posted : 16 March 2019 18:23:10

Rank: Pro
Build-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/06/2010
Posts: 331
Points: 997
Location: Bannockburn
Build Stage 27 - The transmission cover
Parts required:
A and B from Parts 27.

Also required:
The engine assembly from Stage 26.

The transmission cover is attached to the transmission case and secured with screws.

All unused parts from the pack are stored for later use.

bugsec attached the following image(s):
068.jpg
Markwarren
#66 Posted : 16 March 2019 21:56:12

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Administrators, Global Forum Support, Registered, Moderator, Official Builds

Joined: 04/01/2016
Posts: 4,279
Points: 13,124
Location: Northamptonshire, England
Nice work Grahame.Love

Mark
bugsec
#67 Posted : 12 April 2019 20:52:04

Rank: Pro
Build-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/06/2010
Posts: 331
Points: 997
Location: Bannockburn
Thanks Mark

Pack 06 contains Parts 28 - 33 (Build Stages 28 - 31)

Parts supplied:
Parts 28:
A - Cylinder base 2
B - Cylinder
C - Bolts

Parts 29:
A - Cylinder
B - Cylinder base 1
C - Bolts

Parts 30:
A - Rear tyre

Parts 31:
A - Pushrod 3 + 4
B - Pushrod base
C - Screws

Parts 32:
A - Valve cover
B - Oil filter top
C - Oil filter

Parts 33:
A - Cylinder head top
B - Cylinder head
C - Screws

bugsec attached the following image(s):
Parts 28.jpg
Parts 29.jpg
Parts 30.jpg
Parts 31.jpg
Parts 32.jpg
Parts 33.jpg
bugsec
#68 Posted : 12 April 2019 20:53:28

Rank: Pro
Build-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/06/2010
Posts: 331
Points: 997
Location: Bannockburn
Build Stage 28 - The forward cylinder base
Parts required:
A and C from Parts 28

Also required:
The engine assembly from Stage 27

The cylinder base is aligned with the opening in the engine marked 2 and is then secured using 4 bolts.

bugsec attached the following image(s):
069.jpg
070.jpg
bugsec
#69 Posted : 12 April 2019 20:54:27

Rank: Pro
Build-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/06/2010
Posts: 331
Points: 997
Location: Bannockburn
Build Stage 29 - The rear cylinder base
Parts required:
B and C from Parts 29

Also required:
The engine assembly from Stage 28

The cylinder base is aligned with the opening in the engine marked 1 and is then secured using 4 bolts.

bugsec attached the following image(s):
071.jpg
072.jpg
bugsec
#70 Posted : 12 April 2019 20:55:11

Rank: Pro
Build-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/06/2010
Posts: 331
Points: 997
Location: Bannockburn
Build Stage 30 - The forward pushrods
Parts required:
A, B and C (Phillips screws) from Parts 31

Also required:

The pushrods are marked 3 and 4 and each is aligned to the respective mount on the base and secured with a screw.

bugsec attached the following image(s):
073.jpg
074.jpg
075.jpg
bugsec
#71 Posted : 12 April 2019 20:55:56

Rank: Pro
Build-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/06/2010
Posts: 331
Points: 997
Location: Bannockburn
Build Stage 31 - Fitting the pushrods
Parts required:
C (slot-head screws) from Parts 31

Also required:
The engine assembly from Stage 29 and the forward pushrod assembly from Stage 30.

The forward pushrod assembly is attached to the engine assembly and secured using the screws.

All unused parts from the pack are stored for later use.

bugsec attached the following image(s):
076.jpg
birdaj2
#72 Posted : 12 April 2019 23:08:58

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contribution
Groups: Registered

Joined: 31/05/2010
Posts: 4,835
Points: 14,557
Location: Wiltshire
That looks very nice Graham.

I took on the harley when it was in the sale.

Never built a bike before. Bit slow going at the moment in terms of build but looks like it will turn out a nice model.

Looking at your build here is that an infra red receiver that you have fitted into the horn part?

This one also looks a very nice model.
Happy Modelling

Project: USS Constitution - subscription complete.
Project: Porsche 911 - subscribed to the 24 month option. Project: Jaguar - E type
Project: Harley Davidson Fat boy. Project: Lam. Countach
Project: 1:200 Bismarck (hachette).
Markwarren
#73 Posted : 14 April 2019 09:36:55

Rank: Super-Elite

Build-Diary Medal: Build-Diary Medal of HonourPublisher Medal: Article published MedalActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsRed Medal: Red MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding build
Groups: Administrators, Global Forum Support, Registered, Moderator, Official Builds

Joined: 04/01/2016
Posts: 4,279
Points: 13,124
Location: Northamptonshire, England
Nicely done, looking excellent. It is a great kit and a great size. I bought the fat boy Harley helmet so it can be painted into the Captain America helmet, should have it finished soon. Just finalising painting it with the top coat of lacquer, I have also redone the tank to match.

Great workLove

Mark
Kev the Modeller
#74 Posted : 14 April 2019 10:55:59

Rank: Vice-Master


Groups: Registered

Joined: 25/11/2018
Posts: 567
Points: 1,728
Location: Southeast UK
Nice job Graham, very neatly assembled and looking good. Well done. ThumpUp

Kev Smile
Per Ardua Ad Astra
Users browsing this topic
Guest
4 Pages «<234
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.242 seconds.
DeAgostini